With a precision needle tip, the flow rate is higher than on a stainless steel needle tip with the same pressure. Thus, it is possible to work with much lower pressures to « spare” the product. Precision needle tips offer a cost-effective alternative technology to facilitate the dispensing of microdots, small lines and precise patterns of fluid on small pieces.
Precision needle tips
01 Overview
The conical shape of the precision needle tips allows the fluid to flow more easily, with very low pressure drops due to the very small and progressive output diameter.
Precision tips
Precision tips02 Technical description
Needle sizes less than 50 microns
Color coded tips
High accuracy / low cost
High Flow
03 Our precision tips
| Gauge | Color | ID | OD | Code |
| 18 |  Pink |
1,039 mm (0,040″) | 1,240 mm (0,048″) | A-100-00-00-18 |
| 19 |  Beige |
0,861 mm (0,033″) | 1,059 mm (0,041″) | A-100-00-00-19 |
| 20 |  Green |
0,681 mm (0,026″) | 0,881 mm (0,034″) | A-100-00-00-20 |
| 21 |  Light Blue |
0,610 mm (0,024″) | 0,810 mm (0,031″) | A-100-00-00-21 |
| 23 |  Purple |
0,564 mm (0,022″) | 0,635 mm (0,025″) | A-100-00-00-23 |
| 25 |  White |
0,437 mm (0,017″) | 0,508 mm (0,020″) | A-100-00-00-25 |
| 27 |  Red |
0,335 mm (0,013″) | 0,406 mm (0,016″) | A-100-00-00-27 |
| 30 |  Black |
0,234 mm (0,009″) | 0,305 mm (0,012″) | A-100-00-00-30 |
| 06 |  Blue |
0,152 mm (0,006″) | 0,254 mm (0,010″) | A-100-00-00-06 |
| 04 |  Orange |
0,101 mm (0,004″) | 0,203 mm (0,008″) | A-100-00-00-04 |
| 02 |  Yellow |
0,051 mm (0,002″) | 0,152 mm (0,006″) | A-100-00-00-02 |
04 Data sheet
05 Features product
Stainless steel needle tips
The Stainless Steel needle tips are available in different lengths from 0.25’’ to 1.25’’ and in different gauges from G14 to G32.
PTFE needle tips
These dispensing tips are recommended for low viscosity fluids dispensing.
Tapered needle tips
These needles have been designed for rapid and regular application of medium to high viscosity fluids or particulate-laden products.
Bent Needle Tip
Angled stainless steel tips are available in 45° and 90° bends.
Flexible needle tips
The polypropylene cannulas can be cut to the desired length and allow access to areas that are difficult to reach.
Oval needle tips
These needle tips allow you to dispense in flat cords, pasty products such as mastics, solder paste and epoxies.
Precision needle tips
The conical shape of the precision needle tips allows the fluid to flow more easily, with very low pressure drops due to the very small and progressive output diameter.
Brush needle tips
Brush needles tips allow to dispense glues and / or grease with hard or soft bristles and for large or small flow.